Highpoint RocketRAID 2740 Manuel d'utilisateur télécharger pdf (Page 48)

Enable Audible Alarm – enable or disable the card’s alarm. The alarm will sound if the disk or array stops

responding.

Event Log Path – Use this to select the location of the Web GUI’s event log.

Enable Continue to Rebuild on Error – this setting is disabled by default. We do not recommend using

unless replacement disks are unavailable, or if recommended by a Customer Support technician.

Set Rebuild Priority – The default setting is Medium. Alter this setting to lower or raise the priority of an

Initialization, Rebuild or Verification session. A lower setting devotes resources to other systems tasks. A

higher setting prioritizes the RAID maintenance session

Power Saving – Spin-down of idle disks (MAID)

This feature allows the card to safely power down RAID arrays when not in use.

Allowing idle disks to spin down minimizes the power consumption of the system’s storage devices.

In addition to saving energy, spinning down unused disks reduces mechanical wear and the buildup of

waste heat, which in turn, can greatly prolong the life of the system’s storage hardware, over the long-term.

Click on the drop down menu provided for “Spin down idle disk (minutes)”, and select a time (in

minutes). This determines when Host Adapter will power down idle hard disks.

Click the “Submit” button to activate this feature.

SAF-TE – This setting is related to the system chassis. The RR2740/2744 models do not support this

option.

Listening Port – This item is the card’s port address. 7402 is the default setting.

Password – Use this feature to change the Administrator’s password. The default password is “hpt”.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 64 65

Pas de commentaire

Highpoint RocketRAID 2740 Manuel d'utilisateur Page 48