Highpoint RocketRAID 2220 Guide de l'utilisateur télécharger pdf (Page 37)

# ln –sf /etc/init.d/hptdriver /etc/rc.d/rc4.d/S01hptdriver

Step 3 Configure System to Automatically Load the Driver (continued)

# ln –sf /etc/init.d/hptdriver /etc/rc.d/rc5.d/S01hptdriver

Step 4 Configure System to Mount Volumes during Startup

The system can be instructed to automatically mount the array(s) during startup by modifying the

file”/etc/fstab”.

For example, add the following line to tell the system to mount /dev/sda1 to location /mnt/raid after startup:

/dev/sda1 /mnt/raid ext3 defaults 0 0

4 - Updating the Driver

1. If the original driver is installed in the system’s initrd (Initial RAM Disk) file (when using a system

installed to RocketRAID 2220 controller, for example), the driver module in the initrd file should be

updated using the mkinitrd command (or extract the initrd file and replace the driver module

manually).

2. If the original driver is installed in the /lib/modules/`uname –r`/kernel/drivers/scsi/ directory, and

loaded by the script file (Example /etc/init.d/hptdriver) during the init process, or the configure file

(Example /etc/modules.conf), please replace it with the new driver (hptmv6.ko).

5 - Uninstalling the Driver

To uninstall the RocketRAID 2220 driver

Note: The driver cannot be uninstalled while the system is booted from a disk or array attached to the

RocketRAID 2220.

To uninstall the driver, remove the lines added to /etc/fstab, and remove the files created in the /etc/init.d

directory.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 45 46

Pas de commentaire

Highpoint RocketRAID 2220 Guide de l'utilisateur Page 37