Highpoint RocketRAID 1640 Manuel d'utilisateur télécharger pdf (Page 29)

3.7 Duplicate Critical RAID 1 array

If a RAID 1 duplication procedure has been canceled, or any problem or fault that may

have lead to an inconsistency between the data on the source disk/disk array, and the

backup data on the target disk/disk array, is detected, the BIOS will display a warning

message during the computer's boot-up procedure. The faulty disk/disk array will be

marked as critical in the status column, and the BIOS will automatically prompt you to

duplicate the array to repair the inconsistency. See the image below:

BIOS Configuration Utility

3-9

5. To view information about logical drives, use the arrow keys to highlight the

Logical Drives option, and press ENTER. The following window will be displayed

(see the image below):

4. To view information about a particular disk/RAID Array, use the arrow keys to

highlight the RAID array option, and press ENTER. The following window will be

displayed (see the image below):

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 62 63

Pas de commentaire

Highpoint RocketRAID 1640 Manuel d'utilisateur Page 29