Highpoint RocketRAID 1740 Guide de l'utilisateur télécharger pdf (Page 30)

RocketRAID 174x Driver and Software Installation

3 Array Management

Creating an Array

To create an array:

1) Select “Manage - Array” from the menu.

2) Click the Create Array button. The create array page will appear.

3) Choose the array type you want to create from the drop-down list.

4) Enter a name for the array (this is optional)

5) If you are creating a redundant RAID array (RAID1, 5, 10), select an initializa-

tion option for the array.

Note: An un-initialized RAID1 or RAID10 array can still provide redundancy in case of

a disk failure. A RAID5 array, however, is not fault-tolerant until initialization is

finished.

6) If you are creating RAID5, specify a cache policy for the array:

Write-back

When the write-back setting is selected, writes to the array are cached. This will result

in higher performance, but data loss may occur in case of a power failure.

4-6

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 64 65

Pas de commentaire

Highpoint RocketRAID 1740 Guide de l'utilisateur Page 30