Highpoint RocketRAID 2302 Guide de l'utilisateur télécharger pdf (Page 16)

RocketRAID 230x Hardware Description/Installation

LED Connections – RR2304

The RocketRAID 2304 does not provide LED connectors. It was designed for use

with external drive enclosures, rather than internal disk configurations.

Note: these LED connectors were designed for use with SATA and SATAII

backplanes (typically used in hot-swap enclosures or drive bays designed for use

with server chassis). They were not designed for use with standard 2-pin LED’s

(commonly used by desktop chassis).

LED Connections – RR2302

The RocketRAID 2302 provides LED connectors for it’s two internal SATA channels.

Pins 1 and 2 represent SATA channel 1 and 2 respectively.

J3 provides LED support for Disk Failure, while J4 supports Disk Activity.

Note: As with the RR2300 model, these LED connectors were designed for use with

SATA and SATAII backplanes (typically used in hot-swap enclosures or drive bays

designed for use with server chassis). They were not designed for use with standard

2-pin LED’s (commonly used by desktop chassis).

2-6

3- Installing the RocketRAID Host Adapter

Note: Make sure the system is powered-off before installing the RocketRAID host

adapter.

The RocketRAID 2300 and 2302 models include both standard and low-profile

brackets. It may be necessary to attach the low-profile bracket in place of the stan-

dard bracket, depending upon the chassis design. The RocketRAID 2304 is a full-

height card, and is not designed for use with low-profile chassis.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 80 81

Pas de commentaire

Highpoint RocketRAID 2302 Guide de l'utilisateur Page 16