Highpoint RocketRAID 2642 Guide de l'utilisateur télécharger pdf (Page 22)

HighPoint RAID Management and Device Driver CD

2 - Device Driver Installation

Windows Driver Installation (Win2000, XP, Win 2003)

Before installing the RocketRAID 264x host adapter’s device driver, make sure the

host adapter and all required hard disks have been installed into the system’s chassis/

disk enclosure. If you are working with a supplied driver, or driver download, you will

want to extract the contents directly to a directory of your choice (or device). You will

need to browse to this location, in order to load the driver (see step 2, below).

Installing the RocketRAID 264x driver for an existing Windows system.

After the operating system has booted, Windows will automatically detect the

RocketRAID 264x host adapter, and request that a device driver be installed. To install

the device driver, follow the steps outlined below:

1. When the “Found New Hardware Wizard” window appears, select “Install from

a list or specific location (Advanced)”, and click Next to continue.

2. Click on the “Include this location in the search” option, and select the system’s

floppy drive (generally Disk A). Next, insert the Driver Installation diskette into

the system’s floppy drive, or select Browse, and browse to the location of the

driver. If you are using the RocketRAID 264x software CD, the drivers are

located in RR264x – Driver – Windows – Windows (then select the appropri-

ate folder).

3. Windows may display a warning message that states the driver has “not been

signed”. Select “Continue Anyway”, then click Finish when prompted. When

windows asks to reboot the system, choose No.

4. Remove the Driver Installation diskette from the floppy drive, then Shut down

and restart the computer.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 34 35

Pas de commentaire

Highpoint RocketRAID 2642 Guide de l'utilisateur Page 22