Highpoint RocketRAID 2644x4 Guide de l'utilisateur télécharger pdf (Page 13)

RocketRAID 2644X4 Hardware Description/Installation

2-2

These jumper can be used to select PCI-E work model. As following:

Connect Pin 1 and Pin 2 support PCI-E X1, and connect Pin 2 and Pin 3 support PCI-E

X4.

2 - Installing the RocketRAID Host Adapter

Note: Make sure the system is powered-off before installing the RocketRAID host

adapter.

The RocketRAID 2644X4 include both standard and low-profile brackets. It may be

necessary to attach the low-profile bracket in place of the standard bracket, depend-

ing upon the chassis design. The RocketRAID 2644X4 is a full-height card, and is not

designed for use with low-profile chassis.

1. Open the system chassis and locate an unused PCI-Express x4.

2. Remove the PCI slot/bracket cover.

3. Gently insert the RocketRAID card into the PCI-Express slot, and secure the

bracket to the system chassis (illustration below shows RR2644X4).

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 83 84

Pas de commentaire

Highpoint RocketRAID 2644x4 Guide de l'utilisateur Page 13