Highpoint RocketRAID 3560 Guide de l'utilisateur télécharger pdf (Page 17)

Hardware – Description and Installation

2.1 – Installing the RocketRAID 35xx Host Adapter

2 – Installing the RocketRAID Host Adapter

Note: Make sure the system is powered-off before installing the RocketRAID 35xx

host adapter.

1. Open the system chassis and locate an unused PCI-E x8.

2. Remove the PCI slot cover.

3. Gently insert the RocketRAID 35xx into the PCI-E slot, and secure the bracket to

the system chassis.

4. After installing the adapter, attach the Mini-SAS connectors to the RocketRAID

35xx’s Mini-SAS port,and to chassis backplane. Each Mini-SAS cable supports

up to 4 hard disk drives. Consult the chassis’s manual for proper installation

procedures.

5. Close and secure the system chassis.

(illustration shows RocketRAID 3560)

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 61 62

Pas de commentaire

Highpoint RocketRAID 3560 Guide de l'utilisateur Page 17