Highpoint RocketRAID 4322 Guide de l'utilisateur télécharger pdf (Page 12)

Hardware – Description and Installation

2.1 – Installing the RocketRAID 4320 Host Adapter

Note: Make sure the system is powered-off before installing the RocketRAID 4320

host adapter.

1. Open the system chassis and locate an unused PCI-E x8 or x16 slot.

2. Remove the PCI slot cover.

3. Gently insert the RocketRAID 4320 into the PCI-E slot, and secure the bracket to

the system chassis.

4. After installing the adapter, attach the Mini-SAS cables to the RocketRAID

4320’s Mini-SAS port, and the chassis backplane. Each Mini-SAS cable supports

up to 4 hard disk drives. Consult the chassis’s manual for proper installation

procedures.

5. Close and secure the system chassis.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 51 52

Pas de commentaire

Highpoint RocketRAID 4322 Guide de l'utilisateur Page 12