Highpoint ROCKETRAID 2314 Guide de l'utilisateur télécharger pdf (Page 34)

RocketRAID 231x Driver and Software Installation

3 - Creating an Array

To create an array:

1. Highlight the “Management” menu, then select the “Array Management”

function.

2. Click the Create button on the toolbar or select the “Create” command from the

“Operation” menu. The array creation wizard will appear.

3. Select the desired RAID level from the drop-down list.

4. Enter a name for the array using the keyboard (this is optional), and click the Next

button.

5. If you are creating a redundant array (RAID 1, 5, 10), select an initialization

option. If you are creating a RAID 0 or JBOD (volume), skip to step 6:

For RAID1 and RAID 10 arrays, the default initialization method is “No

initialization”.

For RAID5 arrays, the default initialization method is “Foreground”.

If you are creating RAID5, you will be asked to specify a cache policy:

Write-back - when the write-back setting is selected, all write requests sent to

the array are cached. This will result in higher performance, but data loss may

occur in case of a power failure.

4-7

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 91 92

Pas de commentaire

Highpoint ROCKETRAID 2314 Guide de l'utilisateur Page 34