Highpoint RocketRAID 2642 Guide de l'utilisateur télécharger pdf (Page 15)

RocketRAID BIOS Utility

BIOS Commands

Create - this command is used to open the RAID Creation menu.

Delete - this command will delete the selected RAID array.

Add/Remove Spare - this command is used to assign hard disks to function as spare

disks. The controller is capable of using spare disks to automatically rebuild broken or

faulted RAID arrays.

Settings - this command opens the settings menu (selecting the boot disk/array,

staggered drive spinup)

View – this command is used to select between two views: Devices (HARD DISKS),

and Arrays (configured RAID arrays).

Initialize - this command is used to prepare disks for use with RAID arrays. Disks

must be initialized before they can be used to create arrays.

2 - Creating RAID Arrays

Initializing Disks:

Before creating a RAID array, the disks must be initialized. Disk initialization writes

necessary RAID configuration information to the hard disks. Select the Initialize

command from the toolbar, and press ENTER.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 34 35

Pas de commentaire

Highpoint RocketRAID 2642 Guide de l'utilisateur Page 15