Highpoint ROCKETRAID 2310 Guide de l'utilisateur télécharger pdf (Page 68)

FreeBSD Driver Support

2 - Installing the RocketRAID 2310 Driver on an Existing System

If you are currently running FreeBSD and would like to access drives or arrays

attached to the RocketRAID 2310 Controller, follow the steps outlined below:

Step 1 Copy the Driver Module

If you have made FreeBSD drivers into a diskette, you can insert the driver diskette to

floppy drive, then using the following commands to copy the driver module:

For FreeBSD 4.x:

# mount –o ro /dev/fd0 /mnt

# cp /mnt/rr2310-xxx.ko /modules/rr2310.ko

# umount /mnt

For FreeBSD 5.x:

# mount –o ro /dev/fd0 /mnt

# cp /mnt/rr2310-xxx.ko /boot/kernel/rrR2310.ko

# umount /mnt

Alternately, it is possible extract the files from the .img files directly, without using a

floppy diskette:

For FreeBSD 4.x:

# vnconfig vn0c freebsd_xxx.img

# mount /dev/vn0c /mnt

# cp /mnt/rr2310-xxx.ko /modules/rr2310.ko

# vnconfig –du vn0c myfilesystem mount=/mnt

6-5

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 74 75

Pas de commentaire

Highpoint ROCKETRAID 2310 Guide de l'utilisateur Page 68