Highpoint ROCKETRAID 2340 Guide de l'utilisateur télécharger pdf (Page 36)

RocketRAID 2340 Driver and Software Installation

4-12

3. During the OCE/ORLM procedure, the redundancy level of the array will be

the lowest of the source and target arrays; e.g. if you ORLM a RAID 0 array

to a RAID 1 array, the array will be non-redundant until the procedure is

complete.

4. The OCE/ORLM process can be aborted and continued at later time.

However, you should always stop the transform progress from the RAID

Management software.

5. An unexpected system crash may result in data loss while performing OCE/

ORLM on an array. We strongly recommend backing up data before starting

the OCE/ORLM process.

8 - Misc. Array/Device Options

Device Management

The Device Management window provides configuration information about control-

lers (the RocketRAID 2340 and other HighPoint host adapters), channels and hard

disks.

To access the Device Management window, highlight the “Management” menu, and

select the “Device Management” function.

Changing Device Settings

Depending upon the hard disk in question, and support provided by the current

device driver, you can adjust settings for disk: Read Ahead, Write Cache, TCQ, and

NCQ. Each feature can be enabled or disabled individually.

S.M.A.R.T Status

You can view S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology)

data about a drive to help troubleshoot any problems that occur. You can also setup

periodical S.M.A.R.T. status checks that send notification messages when S.M.A.R.

T. thresholds are exceeded.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 75 76

Pas de commentaire

Highpoint ROCKETRAID 2340 Guide de l'utilisateur Page 36