Highpoint RocketRAID 3522 Guide de l'utilisateur télécharger pdf (Page 18)

RocketRAID 3522 BIOS Utility

Press [ALT + S] to open the “System” menu in the figure 1; then select “Supervisor

mode”, and press ENTER. This will open the user authentication interface. Enter

the appropriate password and then press ENTER. The initial password is “hpt”.

2 - Disk Menu

Press [ALT + D] to access the “Disk” menu.

View a disk

From the Disk menu, use the ↑ ↓ arrows keys to select a disk. After highlighting the

desired disk, select Disk->Information to view hardware data about this disk.

Disk initialization

Disks must be initialized prior to creating a RAID array. To initialize a disk, access the

Disk menu and highlight a disk using the ↑ ↓ arrows keys. Press ENTER to add the

disk to the initialization list. Repeat this procedure for each disk that requires

initialization. After selecting the required disks, select Disk->Initialize option from the

Disk menu.

3-2

1 ... 17 18 19 ... 70

Pas de commentaire

Highpoint RocketRAID 3522 Guide de l'utilisateur Page 18