Highpoint RocketRAID 3522 Guide de l'utilisateur télécharger pdf (Page 64)

FreeBSD Driver Support

7-5

For FreeBSD 5.x:

# mdconfig –a –t vnode –f freebsd_5.x.img –u 0

# mount /dev/md0 /mnt

# cp /mnt/hptiop-xxx.ko /boot/kernel/hptiop.ko

# umount /mnt

# mdconfig –d –u md0

Step 2 Test the Driver Module

Test the driver module to ensure that it works with the system, by loading it during

bootup. If the module has been loaded successfully you should see the RocketRAID

banner and a display screen of the attached drives. You can now access the drives as a

SCSI device.

Note: If you have no other SCSI device, the first device is /dev/da0, then /dev/da1, etc.).

Example:

F1 FreeBSD

Default: F1

>> FreeBSD/i386 BOOT

Default: 0:ad(0,a)/boot/loader

boot:

BTX loader 1.00 BTX version is 1.01

Console: internal video/keyboard

BIOS driver A: is disk0

BIOS driver C: is disk2

BIOS 636kB/74512kB available memory

FreeBSD/i386 bootstrap loader, Revision 0.8

(mailto:[email protected], Sat Apr 21 08:46:19 GMT 2001)

Loading /boot/defaults/loader.conf

/kernel text=0x24f1db data=0x3007ec+0x2062c -

<- For FreeBSD 5.1 and later: select “6” on “Welcome to

FreeBSD” screen.

Hit [Enter] to boot immediately, or any other key for

command prompt.

Booting [kernel] in 9 seconds…

<-press SPACE key

Type ’?’ for a list of commands, ’help’ for more de-

tailed help.

ok load hptiop

/modules/hptiop.ko text=0xf571 data=0x2c8+0x254

ok autoboot

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 70

Pas de commentaire

Highpoint RocketRAID 3522 Guide de l'utilisateur Page 64