Highpoint ROCKETRAID 2310 Guide de l'utilisateur télécharger pdf (Page 11)

RocketRAID 2310 Hardware

1 - RocketRAID 2310 Adapter Layout

Port1- Port4

These represent the RocketRAID 2310’s four SATAII channels. The SATA port

furthest away from the surface of the adapter is always the odd numbered channel (1,

3), while the port closest to the adapter is the even numbered channel (2, 4,).

J3, J4

These LED connectors can be used to configure Disk Failure (J3) and Disk Activity

(J4) indicators for each individual disk attached to the RocketRAID 2310. These

connections are ideal for server chassis that utilize removable drive bays.

JP3

This jumper can be used to enable or disable the card’s alarm (BEEP1). The alarm is

enabled by default (the jumper is attached). To disable the alarm, remove the jumper.

BEEP1 - Speaker

Alarm (speaker): the speaker emits and audible alarm in the case of disk/array failure.

JP5

SAF-TE support: this support is dependent upon the system chassis. Not all chassis

models support SAF-TE features. Consult the chassis’s manual for more information.

RocketRAID 2310 Hardware Description/Installation

2-1

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 74 75

Pas de commentaire

Highpoint ROCKETRAID 2310 Guide de l'utilisateur Page 11