Highpoint RocketRAID 3510 Guide de l'utilisateur télécharger pdf (Page 36)

4-5

Installing the driver for an existing Windows Vista system

1. Install the RocketRAID 3xxx host adapter into the PC, then boot up Windows

Vista.

2. Windows should automatically detect the card, and display the “Found New

Hardware” wizard pop-up window. Select “Locate and install driver

software”. When Windows asks: “Windows needs your permission to

continue”, select “continue”.

3. Select “I don’t have disc, show me other options” and then select “Browse

my computer for driver software”.

4. Specify the location of the driver and click “Next”.

5. When asked: “Would you like to install this driver software?”, select

“Install”.

6. The RocketRAID 3xxx will be available for use after Vista installation.

Installation Verification

After the driver has been installed:

1. Click the Start button, select “Settings”, then select “Control panel”, double click

“System” item.

2. In the popup window, select Hardware tab and then click Device Manager

button.

3. Double click the “SCSI and RAID controllers” entry. If the RocketRAID device

entry is not displayed, or there are “?” or “!” marks displayed near the

RocketRAID entry, the driver has not been installed properly. Delete the entries

and reinstall the driver.

RocketRAID 3xxx Driver and Software Installation

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 79 80

Pas de commentaire

Highpoint RocketRAID 3510 Guide de l'utilisateur Page 36