Highpoint RocketRAID 3510 Guide de l'utilisateur télécharger pdf (Page 48)

Web RAID Management Interface

2) Click “

Rescan Devices” button.

Note: When you are hot-plugging an entire array, run rescan only after all array

members (hard disks) have been physically plugged or unplugged from the system.

You can rescan all the devices at once using the Rescan function on the Array

Management page.

5 Configuring Spare Disks

To configure spare disks attached to the RocketRAID card, select the “Manage -

Spare” function. The Spare Pool Management page will be displayed.

Adding a Spare Disk

To add a spare disk, select a disk from the Available Disks list and click the

Add Spare

button. This will add the disk to the Spare Pool list.

Removing a Spare Disk

To remove a spare disk, select it from the Spare Pool list and click the

Remove Spare

button. This will remove the disk from the Spare Pool list.

6 Managing Events and Tasks

The HighPoint Web RAID Management Software automatically logs all controller

related events that have occurred (for all controllers/cards managed by the software).

In addition you can configure E-mail Notification to receive information about these

events (see Section 7 Settings -View Events).

5-11

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 79 80

Pas de commentaire

Highpoint RocketRAID 3510 Guide de l'utilisateur Page 48