Highpoint RocketRAID 3510 Guide de l'utilisateur télécharger pdf (Page 42)

Web RAID Management Interface

5-5

3) Click the Delete button.

Note: An array in use by the operating system cannot be deleted. Any data stored on

a deleted array will be inaccessible.

Array Maintenance – Rebuilding/Verifying/Modifying RAID arrays

Rebuilding a Failed Array

When an array member in a redundant array fails, the array will be listed as broken. A

broken array will be automatically rebuilt using available-spare disks. However, if you

have no spare disks configured, you can still rebuild by manually adding an Available

Disk to the array. To add a disk to a broken array:

1) Select menu “

Manage - Array”.

2) Highlight the desired RAID array

3) Click the “

Maintenance” button.

4) Click the “

Add Disk” button.

5) If the disk is successfully added to the array, rebuild process will start

automatically. A progress bar will be displayed.

Note: If the system utilizes hot-swap capable enclosures, you can add new physical

disks to the RocketRAID card in order to rebuild or modify an existing array, using the

“Rescan” feature.

Reminder: When adding disks manually, make sure to initialize the disk (see Preparing

Hard Disks).

Only initialized disks can be used to rebuild RAID arrays.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 79 80

Pas de commentaire

Highpoint RocketRAID 3510 Guide de l'utilisateur Page 42