Highpoint RocketRAID 3510 Guide de l'utilisateur télécharger pdf (Page 41)

Web RAID Management Interface

3. Choose the array type you want to create from the drop-down list.

4. Enter a name for the array (this is optional)

5. If you are creating a redundant RAID array (RAID1, 5, 6, 10, 50), select an

initialization option for the array.

Note: An un-initialized RAID1 ,6, 10 or RAID50 array can still provide redundancy

in case of a disk failure. A RAID5 array, however, is not fault-tolerant until initial-

ization is finished.

6. When creating array on IOP RAID controller, All RAID type have cache policy(R5/

50/6 is no “None” option.). And if enable write back, data also can be safe even power

fail if BBU installed.

Write-back

When the write-back setting is selected, writes to the array are cached. This will

result in higher performance, but data loss may occur in case of a power failure.

Write-through

When the write-through setting is selected, writes to the array are always passed

directly to the disks. Subsequent reads may still be completed from the cache, if

appropriate.

6. Select disks from the Available Disks list.

7. Enter a capacity for the array, or use the default value (the maximum capacity for

the array).

8. (VSS) Select Sector Size if needed .

9. Click

Create. If you have specified an initialization option, the initialization

process will start automatically.

Deleting an Array

To delete an array:

1) Select “

Manage - Array” from the menu.

2) Click on the

Maintenance button. An Array Information window will appear.

5-4

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 79 80

Pas de commentaire

Highpoint RocketRAID 3510 Guide de l'utilisateur Page 41